Looking for Exclusive Agency and Distributor! Welcome Contact:0086-18966276297 0086-577-61718910
100% Original Surge Protective Devices (Spd) - HS2-I-50 Lightning Current Arresters – HONI electric
100% Original Surge Protective Devices (Spd) - HS2-I-50 Lightning Current Arresters – HONI electric Detail:
Features/Benefifits
Plug-in format
Data sheet
| TypeTechnical DataNominal line voltage (Un) | HS210-I-50 230/400 V (50/60Hz) |
| Maximum continuous voltage (UC) (L-N) |
255V |
| Maximum continuous voltage (UC) (N-PE) |
255V |
| SPD to EN 61643-11 |
Type 1 |
| SPD to IEC 61643-11 |
class I |
| Lightning impulse current (10/350μs) (Iimp) |
50kA |
| Nominal discharge current (8/20μs) (In) |
50kA |
| Voltage protection level (Up) (L-N) |
≤ 2.0kV |
| Voltage protection level (Up) (N-PE) |
≤ 2.0kV |
| Response time (tA) (L-N) |
< 100ns |
| Response time (tA) (N-PE) |
< 100ns |
| Operating State/Fault Indication |
no |
| Degree of protection |
IP 20 |
| Insulating material / flammability class |
PA66,UL94 V-0 |
| Temperature range |
-40ºC~+80ºC |
| Altitude |
13123 ft [4000m] |
| Conductor Cross Section (max) |
35mm2 (Solid) / 25mm2 (Flexible) |
| Remote Contacts (RC) |
no |
| Format |
Monobloc |
| For mounting on |
DIN rail 35mm |
| Place of installation |
indoor installation |
Dimensions
●The power must be cut off before installation, and live operation is strictly prohibited
●It is recommended to connect a fuse or automatic circuit breaker in series at the front of the lightning protection module
●When installing, please connect according to the installation diagram. Among them, L1, L2, L3 are phase wires, N is the neutral wire, and PE is the ground wire. Do not connect it wrongly. After installation, close the automatic circuit breaker (fuse) switch
●After installation, check whether the lightning protection module is working properly 10350gs, discharge tube type, with window: during use, the fault display window should be checked and checked regularly. When the fault display window is red (or the remote signal terminal of the product with remote signal output alarm signal), it means the lightning protection module In the event of failure, it should be repaired or replaced in time.
●Parallel power supply lightning protection modules should be installed in parallel (Kevin wiring can also be used), or double wiring can be used. Generally, you only need to connect any one of the two wiring posts. The connecting wire must be firm, reliable, short, thick, and straight.
Product detail pictures:
Related Product Guide:
We stick to our enterprise spirit of "Quality, Performance, Innovation and Integrity". We purpose to create a lot more price for our prospects with our rich resources, innovative machinery, experienced workers and great products and services for 100% Original Surge Protective Devices (Spd) - HS2-I-50 Lightning Current Arresters – HONI electric , The product will supply to all over the world, such as: Ecuador, Nepal, luzern, With the superior and exceptional service, we've been well developed along with our customers. Expertise and know-how ensure that we are always enjoying the trust from our customers in our business activities. "Quality", "honesty" and "service" is our principle. Our loyalty and commitments remain respectfully at your service. Contact Us Today For further information, contact us now.
By Bertha from Grenada - 2017.11.12 12:31
The company account manager has a wealth of industry knowledge and experience, he could provide appropriate program according our needs and speak English fluently.
By Lindsay from Victoria - 2018.04.25 16:46
