Factory Free sample 2 Pole T1/T2 Spd - B+C three phase Metal oxide varistor Surge arrestor, surge protection 60KA HS2-60 – HONI electric

Send email to us

Product Detail

Product Tags

Feedback (2)

Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for Dc 400 V Spd, Mcb Dc, Level 3 Ev Charger, Our concept is to help presenting the confidence of each buyers with the offering of our most sincere service, and the right product.

Factory Free sample 2 Pole T1/T2 Spd - B+C three phase Metal oxide varistor Surge arrestor, surge protection 60KA HS2-60 – HONI electric Detail:

Features/Benefifits

Easy installation or retrofifit

Din-rail mountable

Fail-safe /self-protected design

Remote indicator (optional) with 3 pin NO/NC contact

IP20 fifinger-safe design

Visual indicator

Small foot print

Plug-in format

HS25-B60 is the range of devices for discharging induced transient overvoltages (Type 1+2 / Class I+II), in accordance with EN/IEC 61643-11. DIN rail plug-in format.

Ability to discharge lightning currents (10/350μs) and induced voltage surges (8/20 μs).

■Suitable for the second stage of protection in supply distribution panels.

■Discharge capacity with an 8/20 μs waveform. Imax: 60 kA.

■Exclusive devices for TNS, TNC, TT , IT earthing systems.

■Exclusive devices which are compatible with Power Line Communication networks.

■Biconnect – two types of terminal: for rigid or flflexible cable and for fork type comb busbar.

■Available with optional remote signalling.

Data sheet

TypeTechnical DataMaximum continuous voltage (UC) (L-N)	HS25-B60 275 / 320 / 385 / 420V
Maximum continuous voltage (UC) (N-PE)	275V
SPD to EN 61643-11, SPD to IEC 61643-11	Type 1+2 , class I+II
Lightning impulse current (10/350μs) (Iimp)	12.5kA
Nominal discharge current (8/20μs) (In)	30kA
Maximum discharge current (8/20μs) (Imax)	60kA
Voltage protection level (Up) (L-N)	≤ 1.5 / 1.8 / 2.0 / 2.2kV
Voltage protection level (Up) (N-PE)	≤ 1.5kV
Response time (tA) (L-N)	< 25ns
Response time (tA) (N-PE)	< 100ns
Thermal Protection	YES
Operating State/Fault Indication	Green (good) / White or Red (replace)
Degree of protection	IP 20
Insulating material / ﬂammability class	PA66,UL94 V-0
Temperature range	-40ºC~+80ºC
Altitude	13123 ft [4000m]
Conductor Cross Section (max)	35mm2 (Solid) / 25mm2 (Flexible)
Remote Contacts (RC)	Optional
Format	Pluggable
For mounting on	DIN rail 35mm
Place of installation	indoor installation

Dimensions

1. product design standard: this product is designed according to relevant international standards IEC, and its performance meets the requirements of national standard GB 18802.1-2011 “low voltage surge protector (SPD) part 1: performance requirements and test methods of surge protector for low voltage distribution system”.

2. Scope of product use: GB50343-2012 Technical Code for Lightning Protection of Building Electronic Information System

3 Selection of surge protector: The primary SPD must be set in the main distribution box at the entrance of building power supply.

4. Product features: This product has the characteristics of low residual voltage, fast response speed, large current capacity (impulse current Iimp(10/350μs) is 25kA/ line, long service life, simple maintenance and convenient installation, etc.

5.Working temperature: -25℃ ~+70℃, working humidity: 95%.

Quality assurance:

1. Strict control on choose of the raw material sources.
2. Speciific technology guide for the production of each product.
3. Completed quality testing system for the semi-finished products and finised products.

Product detail pictures:

Related Product Guide:

Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for Factory Free sample 2 Pole T1/T2 Spd - B+C three phase Metal oxide varistor Surge arrestor, surge protection 60KA HS2-60 – HONI electric , The product will supply to all over the world, such as: Swansea, Liberia, Buenos Aires, Our company absorbs new ideas, strict quality control, a full range of service tracking, and adhere to make high-quality solutions. Our business aims to "honest and trustworthy, favorable price, customer first", so we won the trust of the majority of customers! If you are interested in our items and services, please do not hesitate to contact us!

2 Pole Spd 1000vdc

Cassette 10 Spd

Dc 400 V Spd

Dc Breaker Dc Spd Surge Protection Device Kit

Spd Surge Protection Device

The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.