High reputation 100v Spd - wholesale 3 phase 10-20ka 385V SPD,overvoltage Power surge protection,lightning protection class II+III spd HS2-10 – HONI electric

Send email to us

Product Detail

Product Tags

Feedback (2)

Our primary purpose is to give our shoppers a serious and responsible company relationship, giving personalized attention to all of them for Ev Car Onboard Charger 50kw, Ev Home Charger, Spd- 30, Our aim is "blazing new ground, Passing Value", in the future, we sincerely invite you to grow up with us and make a bright future together!

High reputation 100v Spd - wholesale 3 phase 10-20ka 385V SPD,overvoltage Power surge protection,lightning protection class II+III spd HS2-10 – HONI electric Detail:

Features/Benefifits

Easy installation or retrofit
Din-rail mountable
Fail-safe /self-protected design
Remote indicator (optional) with 3 pin NO/NC contact
IP20 finger-safe design
Visual indicator
Small foot print

Data sheet

Type	HS25-D10
Technical Data Maximum continuous voltage (UC) (L-N)	275 / 320 / 385 / 420V
Maximum continuous voltage (UC) (N-PE)	275V
SPD to EN 61643-11	Type 3
SPD to IEC 61643-11	class III
Nominal discharge current (8/20μs) (In)	5kA
Maximum discharge current (8/20μs) (Imax)	10kA
Voltage protection level (Up) (L-N)	≤ 1.0 / 1.1/ 1.3 / 1.5kV
Voltage protection level (Up) (N-PE)	≤ 1.5kV
Response time (tA) (L-N)	< 25ns
Response time (tA) (N-PE)	< 100ns
Thermal Protection	YES
Operating State/Fault Indication	Green (good) / White or Red (replace)
Degree of protection	IP 20
Insulating material / ﬂammability class	PA66,UL94 V-0
Temperature range	-40ºC~+80ºC
Altitude	13123 ft [4000m]
Conductor Cross Section (max)	35mm2 (Solid) / 25mm2 (Flexible)
Remote Contacts (RC)	Optional
Format	Pluggable
For mounting on	DIN rail 35mm
Place of installation	indoor installation

Plug-in format

HS25-D10 is the range of devices for discharging induced transient overvoltages(Type 3 / Class III), in accordance with EN/IEC 61643-11. DIN rail plug-in format.
Ability to discharge induced voltage surges (8/20 μs). For very fine protection of sensitive equipment(1.2/50 μs). Installation downstream of type 2 protection.
■Suitable as the final stage of protection in panels with Type 2 protection devices installed upstream. The residual voltage left downstream is less than for Type 1 or 2.
They should be installed as close as possible to the equipment being protected.
■Discharge capacity with an 8/20 μs waveform. Imax: 10 kA.
■Exclusive devices for TNS, TNC, TT , IT earthing systems.
■Exclusive devices which are compatible with Power Line Communication networks.
■Biconnect – two types of terminal: for rigid or flexible cable and for fork type comb busbar.
■Available with optional remote signalling.

Dimensions

Product detail pictures:

Related Product Guide:

Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs of High reputation 100v Spd - wholesale 3 phase 10-20ka 385V SPD,overvoltage Power surge protection,lightning protection class II+III spd HS2-10 – HONI electric , The product will supply to all over the world, such as: Tanzania, Slovakia, Singapore, At Present, our merchandise have been exported to more than sixty countries and different regions, such as Southeast Asia, America, Africa, Eastern Europe, Russia, Canada etc. We sincerely hope to establish wide contact with all potential customers both in China and the rest part of the world.

100v Spd

120ka Spd

150vdc Spd

400vdc Spd

Pv Spd

Solar System Arrester Spd

The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.