Looking for Exclusive Agency and Distributor! Welcome Contact:0086-18966276297 0086-577-61718910
Hot sale Spd Sole - wholesale 3 phase 10-20ka 385V SPD,overvoltage Power surge protection,lightning protection class II+III spd HS2-10 – HONI electric
Hot sale Spd Sole - wholesale 3 phase 10-20ka 385V SPD,overvoltage Power surge protection,lightning protection class II+III spd HS2-10 – HONI electric Detail:
Features/Benefifits
Easy installation or retrofit
Din-rail mountable
Fail-safe /self-protected design
Remote indicator (optional) with 3 pin NO/NC contact
IP20 finger-safe design
Visual indicator
Small foot print
|
Type
|
HS25-D10
|
|
Technical Data Maximum continuous voltage (UC) (L-N) |
275 / 320 / 385 / 420V |
|
Maximum continuous voltage (UC) (N-PE) |
275V |
|
SPD to EN 61643-11 |
Type 3 |
|
SPD to IEC 61643-11 |
class III |
|
Nominal discharge current (8/20μs) (In) |
5kA |
|
Maximum discharge current (8/20μs) (Imax) |
10kA |
|
Voltage protection level (Up) (L-N) |
≤ 1.0 / 1.1/ 1.3 / 1.5kV |
|
Voltage protection level (Up) (N-PE) |
≤ 1.5kV |
|
Response time (tA) (L-N) |
< 25ns |
|
Response time (tA) (N-PE) |
< 100ns |
|
Thermal Protection |
YES |
|
Operating State/Fault Indication |
Green (good) / White or Red (replace) |
|
Degree of protection |
IP 20 |
|
Insulating material / flammability class |
PA66,UL94 V-0 |
|
Temperature range |
-40ºC~+80ºC |
|
Altitude |
13123 ft [4000m] |
|
Conductor Cross Section (max) |
35mm2 (Solid) / 25mm2 (Flexible) |
|
Remote Contacts (RC) |
Optional |
|
Format |
Pluggable |
|
For mounting on |
DIN rail 35mm |
|
Place of installation |
indoor installation |
HS25-D10 is the range of devices for discharging induced transient overvoltages(Type 3 / Class III), in accordance with EN/IEC 61643-11. DIN rail plug-in format.
Ability to discharge induced voltage surges (8/20 μs). For very fine protection of sensitive equipment(1.2/50 μs). Installation downstream of type 2 protection.
■Suitable as the final stage of protection in panels with Type 2 protection devices installed upstream. The residual voltage left downstream is less than for Type 1 or 2.
They should be installed as close as possible to the equipment being protected.
■Discharge capacity with an 8/20 μs waveform. Imax: 10 kA.
■Exclusive devices for TNS, TNC, TT , IT earthing systems.
■Exclusive devices which are compatible with Power Line Communication networks.
■Biconnect – two types of terminal: for rigid or flexible cable and for fork type comb busbar.
■Available with optional remote signalling.
Product detail pictures:
Related Product Guide:
With our loaded working experience and thoughtful products and services, we've got been acknowledged as a reputable supplier for most international buyers for Hot sale Spd Sole - wholesale 3 phase 10-20ka 385V SPD,overvoltage Power surge protection,lightning protection class II+III spd HS2-10 – HONI electric , The product will supply to all over the world, such as: Azerbaijan, Belgium, Cannes, We aim to build a famous brand which can influence a certain group of people and light up the whole world. We want our staff to realize self-reliance, then achieve financial freedom, lastly obtain time and spiritual freedom. We do not focus on how much fortune we can make, instead we aim to obtain high reputation and be recognized for our products. As a result, our happiness comes from our clients satisfaction rather than how much money we earn. Ours team will do best for you always.
By Nina from France - 2017.09.28 18:29
The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
By Alice from Indonesia - 2017.11.29 11:09
